Cqrobot
1-7 di 280 risultati
Cqrobot
CQRobot Ocean: TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.
14,99 €- Wide Voltage Input: 3.3V to 5.5V. Good Compatibility Output: 0 to 2.3V analog signal output, compatible with 5V or 3.3V controller.
- AC Excitation Source: effectively prevent probe from polarization, Waterproof Probe.
Cqrobot
600 Pieces Standard Computer Jumper Caps Header Pin Shunt Short Circuit 2-Pin Connector Open Top 2.54mm. Suitable for Arduino Raspberry Pi PCB PC DVD HDD Motherboard Shorting and Other Items.
15,99 €- Red, Blue and Black standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
- White, Green and Yellow standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
Cqrobot
CQRobot 90 Paia/460 Pezzi JST XH 2,54 mm Passo 2/3/4-Spilli Prese e Spine IC Connettore Adattatore Terminale Maschio Femmina, DIP Crimpare Suite. Connettori JST per Circuiti Integrati Industriali.
12,99 €- Basette spina connettore maschio JST-XH passo 2,54 mm, 30 pezzi ciascuno di 2-pin, 3-pin, 4-pin, 90 pezzi in totale.
- 280 pezzi pin del connettori DIP a crimpare JST-XH passo 2,54 mm.
Cqrobot
CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Board (RDM Capable), Device Into DMX512 Network, LED/Music Remote Device Management Capable, Extended DMX Master.
22,99 €- The DMX-shield is an easy way to use the Arduino as a DMX-Master device, It is an add-on (or "shield") for the Arduino,just by adding the DMX-shield on the top of the Arduino.
- This DMX / RDM Shield is a low cost high quality solution that allows you to connect your Arduino driven artwork into DMX512 networks.
Cqrobot
CQRobot Passive RS232 to RS485 Converter Adapter, Bi-direction Transmission, Zero Delay, 600W Surge Voltage Protection and 15KV Static Electricity Protection. for Industrial Serial Communication.
13,99 €- Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication, up to 4000ft/ 1.2 km.
- Enabling the connections of multiple bus nodes, 32 devices can join the RS485 network.
Cqrobot
CQRobot USB a RS422 o RS485 Porta Seriale Convertitore Adattatore Cavo Con Chip FTDI FT232. Supporta Windows 10 8 7 XP Mac. 600W-SPD, 15KV-ESD, Controllo Automatico I/O, Supporto 32 Nodi, 3,2 Metri.
34,99 €- Il convertitore da USB a RS422 o RS485 ha un chip FT232 chipset FTDI integrato ad alte prestazioni, che consente di collegare rapidamente dispositivi RS422 o RS485 alla porta USB del laptop.
- Il convertitore della porta seriale è molto adatto per ambienti industriali. Fornisce protezione contro le sovratensioni da 600 watt e protezione di isolamento ESD da 15KV su tutti i pin di segnale per proteggere apparecchiature di controllo costose e solitamente sensibili da danni elettrici.
Cqrobot
CQRobot Ocean: TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.
14,99 €- TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit.
- Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
Cqrobot
CQRobot Speaker 3 Watt 8 Ohm for Arduino, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 3.0W / 3.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 5 Watt 8 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
9,99 €- Power: Rated Power / Maximum Power 5.0W / 5.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 3 Watt 4 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 2.0W / 3.0W.
- Impedance: 4 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Ocean: TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.
14,99 €- Wide Voltage Input: 3.3V to 5.5V. Good Compatibility Output: 0 to 2.3V analog signal output, compatible with 5V or 3.3V controller.
- AC Excitation Source: effectively prevent probe from polarization, Waterproof Probe.
Cqrobot
600 Pieces Standard Computer Jumper Caps Header Pin Shunt Short Circuit 2-Pin Connector Open Top 2.54mm. Suitable for Arduino Raspberry Pi PCB PC DVD HDD Motherboard Shorting and Other Items.
15,99 €- Red, Blue and Black standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
- White, Green and Yellow standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
Cqrobot
CQRobot 90 Paia/460 Pezzi JST XH 2,54 mm Passo 2/3/4-Spilli Prese e Spine IC Connettore Adattatore Terminale Maschio Femmina, DIP Crimpare Suite. Connettori JST per Circuiti Integrati Industriali.
12,99 €- Basette spina connettore maschio JST-XH passo 2,54 mm, 30 pezzi ciascuno di 2-pin, 3-pin, 4-pin, 90 pezzi in totale.
- 280 pezzi pin del connettori DIP a crimpare JST-XH passo 2,54 mm.
Cqrobot
CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Board (RDM Capable), Device Into DMX512 Network, LED/Music Remote Device Management Capable, Extended DMX Master.
22,99 €- The DMX-shield is an easy way to use the Arduino as a DMX-Master device, It is an add-on (or "shield") for the Arduino,just by adding the DMX-shield on the top of the Arduino.
- This DMX / RDM Shield is a low cost high quality solution that allows you to connect your Arduino driven artwork into DMX512 networks.
Cqrobot
CQRobot Passive RS232 to RS485 Converter Adapter, Bi-direction Transmission, Zero Delay, 600W Surge Voltage Protection and 15KV Static Electricity Protection. for Industrial Serial Communication.
13,99 €- Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication, up to 4000ft/ 1.2 km.
- Enabling the connections of multiple bus nodes, 32 devices can join the RS485 network.
Cqrobot
CQRobot USB a RS422 o RS485 Porta Seriale Convertitore Adattatore Cavo Con Chip FTDI FT232. Supporta Windows 10 8 7 XP Mac. 600W-SPD, 15KV-ESD, Controllo Automatico I/O, Supporto 32 Nodi, 3,2 Metri.
34,99 €- Il convertitore da USB a RS422 o RS485 ha un chip FT232 chipset FTDI integrato ad alte prestazioni, che consente di collegare rapidamente dispositivi RS422 o RS485 alla porta USB del laptop.
- Il convertitore della porta seriale è molto adatto per ambienti industriali. Fornisce protezione contro le sovratensioni da 600 watt e protezione di isolamento ESD da 15KV su tutti i pin di segnale per proteggere apparecchiature di controllo costose e solitamente sensibili da danni elettrici.
Cqrobot
CQRobot Ocean: TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.
14,99 €- TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit.
- Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
Cqrobot
CQRobot Speaker 3 Watt 8 Ohm for Arduino, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 3.0W / 3.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 5 Watt 8 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
9,99 €- Power: Rated Power / Maximum Power 5.0W / 5.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 3 Watt 4 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 2.0W / 3.0W.
- Impedance: 4 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Ocean: TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.
14,99 €- Wide Voltage Input: 3.3V to 5.5V. Good Compatibility Output: 0 to 2.3V analog signal output, compatible with 5V or 3.3V controller.
- AC Excitation Source: effectively prevent probe from polarization, Waterproof Probe.
Cqrobot
600 Pieces Standard Computer Jumper Caps Header Pin Shunt Short Circuit 2-Pin Connector Open Top 2.54mm. Suitable for Arduino Raspberry Pi PCB PC DVD HDD Motherboard Shorting and Other Items.
15,99 €- Red, Blue and Black standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
- White, Green and Yellow standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
Cqrobot
CQRobot 90 Paia/460 Pezzi JST XH 2,54 mm Passo 2/3/4-Spilli Prese e Spine IC Connettore Adattatore Terminale Maschio Femmina, DIP Crimpare Suite. Connettori JST per Circuiti Integrati Industriali.
12,99 €- Basette spina connettore maschio JST-XH passo 2,54 mm, 30 pezzi ciascuno di 2-pin, 3-pin, 4-pin, 90 pezzi in totale.
- 280 pezzi pin del connettori DIP a crimpare JST-XH passo 2,54 mm.
Cqrobot
CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Board (RDM Capable), Device Into DMX512 Network, LED/Music Remote Device Management Capable, Extended DMX Master.
22,99 €- The DMX-shield is an easy way to use the Arduino as a DMX-Master device, It is an add-on (or "shield") for the Arduino,just by adding the DMX-shield on the top of the Arduino.
- This DMX / RDM Shield is a low cost high quality solution that allows you to connect your Arduino driven artwork into DMX512 networks.
Cqrobot
CQRobot Passive RS232 to RS485 Converter Adapter, Bi-direction Transmission, Zero Delay, 600W Surge Voltage Protection and 15KV Static Electricity Protection. for Industrial Serial Communication.
13,99 €- Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication, up to 4000ft/ 1.2 km.
- Enabling the connections of multiple bus nodes, 32 devices can join the RS485 network.
Cqrobot
CQRobot USB a RS422 o RS485 Porta Seriale Convertitore Adattatore Cavo Con Chip FTDI FT232. Supporta Windows 10 8 7 XP Mac. 600W-SPD, 15KV-ESD, Controllo Automatico I/O, Supporto 32 Nodi, 3,2 Metri.
34,99 €- Il convertitore da USB a RS422 o RS485 ha un chip FT232 chipset FTDI integrato ad alte prestazioni, che consente di collegare rapidamente dispositivi RS422 o RS485 alla porta USB del laptop.
- Il convertitore della porta seriale è molto adatto per ambienti industriali. Fornisce protezione contro le sovratensioni da 600 watt e protezione di isolamento ESD da 15KV su tutti i pin di segnale per proteggere apparecchiature di controllo costose e solitamente sensibili da danni elettrici.
Cqrobot
CQRobot Ocean: TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.
14,99 €- TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit.
- Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
Cqrobot
CQRobot Speaker 3 Watt 8 Ohm for Arduino, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 3.0W / 3.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 5 Watt 8 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
9,99 €- Power: Rated Power / Maximum Power 5.0W / 5.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 3 Watt 4 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 2.0W / 3.0W.
- Impedance: 4 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Ocean: TDS (Total Dissolved Solids) Meter Sensor Compatible with Raspberry Pi/Arduino Board. for Liquid Quality Analysis Teaching, Scientific Research, Laboratory, Online Analysis, etc.
14,99 €- Wide Voltage Input: 3.3V to 5.5V. Good Compatibility Output: 0 to 2.3V analog signal output, compatible with 5V or 3.3V controller.
- AC Excitation Source: effectively prevent probe from polarization, Waterproof Probe.
Cqrobot
600 Pieces Standard Computer Jumper Caps Header Pin Shunt Short Circuit 2-Pin Connector Open Top 2.54mm. Suitable for Arduino Raspberry Pi PCB PC DVD HDD Motherboard Shorting and Other Items.
15,99 €- Red, Blue and Black standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
- White, Green and Yellow standard computer jumper caps header Pin shunt short circuit 2-Pin connector open top 2.54mm.(300 Pieces)
Cqrobot
CQRobot 90 Paia/460 Pezzi JST XH 2,54 mm Passo 2/3/4-Spilli Prese e Spine IC Connettore Adattatore Terminale Maschio Femmina, DIP Crimpare Suite. Connettori JST per Circuiti Integrati Industriali.
12,99 €- Basette spina connettore maschio JST-XH passo 2,54 mm, 30 pezzi ciascuno di 2-pin, 3-pin, 4-pin, 90 pezzi in totale.
- 280 pezzi pin del connettori DIP a crimpare JST-XH passo 2,54 mm.
Cqrobot
CQRobot DMX Shield MAX485 Chipset Compatible with Arduino Board (RDM Capable), Device Into DMX512 Network, LED/Music Remote Device Management Capable, Extended DMX Master.
22,99 €- The DMX-shield is an easy way to use the Arduino as a DMX-Master device, It is an add-on (or "shield") for the Arduino,just by adding the DMX-shield on the top of the Arduino.
- This DMX / RDM Shield is a low cost high quality solution that allows you to connect your Arduino driven artwork into DMX512 networks.
Cqrobot
CQRobot Passive RS232 to RS485 Converter Adapter, Bi-direction Transmission, Zero Delay, 600W Surge Voltage Protection and 15KV Static Electricity Protection. for Industrial Serial Communication.
13,99 €- Commercial Grade Bi-Direction RS232 to RS485 Converter used in Industrial Long-haul Communication, up to 4000ft/ 1.2 km.
- Enabling the connections of multiple bus nodes, 32 devices can join the RS485 network.
Cqrobot
CQRobot USB a RS422 o RS485 Porta Seriale Convertitore Adattatore Cavo Con Chip FTDI FT232. Supporta Windows 10 8 7 XP Mac. 600W-SPD, 15KV-ESD, Controllo Automatico I/O, Supporto 32 Nodi, 3,2 Metri.
34,99 €- Il convertitore da USB a RS422 o RS485 ha un chip FT232 chipset FTDI integrato ad alte prestazioni, che consente di collegare rapidamente dispositivi RS422 o RS485 alla porta USB del laptop.
- Il convertitore della porta seriale è molto adatto per ambienti industriali. Fornisce protezione contro le sovratensioni da 600 watt e protezione di isolamento ESD da 15KV su tutti i pin di segnale per proteggere apparecchiature di controllo costose e solitamente sensibili da danni elettrici.
Cqrobot
CQRobot Ocean: TSL25911FN Ambient Light Sensor Compatible with Raspberry Pi, Arduino, STM32. 0 to 88000Lux Detection Range, 600M: 1 Wide, for Industry, Mobile Phone, Computer, Lighting, GPS, etc.
14,99 €- TSL25911FN is a very-high sensitivity light-to-digital converter that transforms light intensity into a digital signal output capable of direct I²C interface. The device combines one broadband photodiode (visible plus infrared) and one infrared-responding photodiode on a single CMOS integrated circuit.
- Two integrating ADCs convert the photodiode currents into a digital output that represents the irradiance measured on each channel. This digital output can be input to a microprocessor where illuminance (ambient light level) in lux is derived using an empirical formula to approximate the human eye response.
Cqrobot
CQRobot Speaker 3 Watt 8 Ohm for Arduino, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 3.0W / 3.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 5 Watt 8 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
9,99 €- Power: Rated Power / Maximum Power 5.0W / 5.5W.
- Impedance: 8 Ohms Plus/Minus 15%.
Cqrobot
CQRobot Speaker 3 Watt 4 Ohm for Arduino, 2.54mm Dupont Interface. It is Ideal for a Variety of Small Electronic Projects.
8,99 €- Power: Rated Power / Maximum Power 2.0W / 3.0W.
- Impedance: 4 Ohms Plus/Minus 15%.